| Borehole
Pumps
We
have an excellent range of stainless steel submersible
borehole pumps. We can offer pumps for a wide range
discharge heads and flowrates. Pumps can be sand resistant,
single phase, three phase and can be fitted with own
brand or Franklin motors.
 SK
Range
Compact and economical they are recommended for domestic
applications including water supplies and irrigation
The
SK range is available as a 4” and 5” borehole
pump. The 4” pump is capable of flows up to 50
litres per minute and heads up to 68 metres. The 5”
pump is capable of flows up to 80 litres per minute
and heads up to 77 metres
The
pumps are made of brass and stainless steel and are
fitted with a patented anti-seize system
4SK
Datasheet
5SK Datasheet
 SUMO
Range
Their high efficiency and reliability make them suitable
for pumping clean water in domestic, civil and agricultural
applications ,for distributing water in combinations
with pressure sets, for irrigating gardens, boosting
pressure etc.
These
multi-stage submerged pumps are available in 2 sizes
either SUMO 2 or SUMO 4, each size can have from 3 to
7 stages, giving heads up to 105 metres and flows up
to 120 litres per minute across the range
SUMO
2 Datasheet Flow max 80l/min, Head max 105m
SUMO
4 Datasheet Flow max 120 l/min, Head max 105m
 4BLOCK
Range
They are recommended for pumping clean water with a
sand content of up to 150 g/m3. Due to their high efficiency
and reliability, they are recommended for domestic water
supplies as part of a pressure set, or for irrigation.
The
pumps are a 4” monoblock submersible pumps designed
as a more economic alternative to traditional borehole
pumps without loss of performance and reliability. Supplied
with integral capacitor and 20 m power cable for ease
of installation.
4
BLOCK Datasheet Flow max 150 l/min, Head max 135m
 4SR
Range (4” Sand Resistant pumps)
They are recommended for pumping clean water with a
sand content of up to 150 g/m3. Their high efficiency
and reliability make them suitable for use in domestic,
civil and industrial sectors, including for water supplies
as part of a pressure set, washdown systems, pressure
boosting and fire fighting systems.
The
combination of a hydraulic design with floating impellers
and the materials used allows the pump to handle sand
content up to 150 g/m3 without risk of blockage or premature
wear.
4SR
Datasheet Flow max 375 l/min, Head max 525m
Also
available is a 6” version please ask for details
6SR
Datasheet Flow max 1000 l/min, Head max 390m
<<<
Back to the main AJ Holmes Products Page
|
