Calpeda Pumps
Calpeda is an Italian manufacturer of a wide range of pump types, the pumps are of excellent build quality to a high industrial standard. Although the range is vast it can be broken down into end suction and inline centrifugal pumps, horizontal and vertical multistage pumps, self priming pumps, submersible pumps, borehole pumps and booster sets/building service pumps.
End Suction and Inline Pumps
The NM range are all close coupled end suction pumps. The can have screwed or flanged connections, all have a mechanical seal, single or three phase motors and perhaps of most interest are available as all cast iron construction or all BRONZE construction.
The N range are long coupled end suction pumps, is only available flanged but has all the other features above plus a gland packed version pump.
The NR range are vertical inline pumps. They are all flanged, all have mechanical seal, either single or three phase and all cast iron construction.
| |
NM Range |
N Range |
NR Range |
| Flow (l/min) |
Up to 8000 |
Up to 8000 |
Up to 1800 |
| Head (m) |
Up to 120 |
Up to 100 |
Up to 80 |
| Liquid Temp (Deg C) |
-10 to +90 |
-10 to +90 |
-10 to +100 |
| Materials |
Cast Iron / Bronze |
Cast Iron / Bronze |
Cast Iron |
| Sealing |
Mechanical Seal |
Mech Seal / Gland Packing |
Mechanical Seal |
| Connections |
Screwed / Flanged |
Flanged |
Flanged |
Speed
|
2 pole / 4 pole |
2 pole / 4 pole |
2 pole / 4 pole |
| Frequency |
50hz / 60hz |
50hz / 60hz |
50hz / 60hz |
| Phase |
Single / Three |
Single / Three |
Single / Three |
Horizontal and Vertical Multi-stage pumps
The stainless MX range are available as vertical and horizontal pumps, the cast iron MGP pump is only available horizontally. The entire range are fitted with mechanical seals and available as single or three phase.The MXP and MXH are stainless steel bodied horizontal pump with plastic and stainless steel impellers respectively.
<<<
Back to the main AJ Holmes Products Page |
