| ELRO
Peristaltic Pumps
With
over 15 years experience Elro peristaltic pumps provide
stationary and mobile pump units. The range comprising
of the
IP,
XP and
M300 series was developed over many years giving a rugged
industrial product built in compliance DIN EN ISO 9001
with the following benefits:
-
Ideal
for abrasive, viscous and shear sensitive media
-
Gentle pumping of liquid or viscous products
-
Constant volume capacity due to vacuum support
-
Dry running resistant
- Suitable
for pumping shear sensitive products
-
Integrated early warning system for tube wear
-
Pumping of liquids containing solids
-
Unobstructed fluid flow – easy cleaning
-
Free of dynamic and pressure loaded seals
-
Portable units – series M300 and T300
-
Infinite regulation of capacity thanks to variable
speed
-
High pumping pressures of maximum 13 bar for the
IP and XP series
-
Dry self priming up to maximum 9.5m / 31 feet lift
-
Easy operation and servicing – only one wear
item
-
Also suitable for explosive environments
-
Full
chemical decontamination units
-
Range
at a glance:
Series |
IP |
XP |
M
and T |
| Flow
range |
0 -
28 cu.m/hr |
0 - 46 cu.m/hr
|
0 -
20 cu.m/hr |
| Discharge Pressure
|
up
to 13 bar |
up to 13
bar |
Up
to 2 bar |
| Sizes |
1",
1 1/4", 1 1/2", 2", 2 1/2"
and 3" |
1 1/4",
2" and 3" |
2" |
| Fixed / Portable
|
Fixed |
Fixed |
Portable |
| Drives |
Air,
electric single phase or three phase.
Variable
speed available
|
Air,
electric single phase or three phase
Variable
speed available
|
Air,
electric 1ph or 3ph
EExd,
EExe, Diesel, Petrol, Hydraulic, Water Turbine |
| Connections |
BSP,
NPT, RJT, Stainless Steel, Polyprop, PVDF |
BSP, NPT,
RJT, Stainless Steel, Polyprop, PVDF |
Quick
release camlock |
| Tube Materials
|
Natural
Rubber, Nitrile, Hypalon, Butyl, EPDM |
Natural Rubber,
Nitrile, Hypalon |
Natural
Rubber, Nitrile, Hypalon, Butyl, EPDM, Polyurethane |
|
|
|
|
Download
full brochure
 
M300
- Mobile Peristaltic unit (ATEX)
The
Elro M300 mobile peristaltic pumps are designed for
very wide range of applications across all industries.
Over many years our unique patented pump system has
been successfully used world wide as the mobile pump
of choice for problem applications in remote areas.
- pumping
of media with entrained solids or fibrous materials
- infinitely
adjustable output variable to > 20m3/h up to 2
bar
- standard
electric motor (400 V/50 Hz) or available in Ex, petrol,
diesel or hydraulic versions
- selection
of hose material for product compatibility
- cost
saving alternative to conventional pump technologies
- one
wearing part only – easy to change
- no
special tools required
GP20.10EX
- Hazardous Chemical Mobile Peristaltic unit
ELRO
pumps for hazardous materials have been designed for
quick, mobile applications in the control of accidents
involving hazardous materials.
Aggressive fluids escaping during an accident may endanger
humans, animals and the environment. Hazardous material
must therefore be quickly and completely pumped into
safe containers without dirt, stones or leaves affecting
the pumping action.
- Easy
operation and servicing
- Dry
running resistant
- Only
one wear item
- Infinite
regulation of capacity
- self
priming to 9.5 m. Suction line can be 50 m long
- Suitable
for explosive environments
- Choice
of hydraulic, pneumatic, water, engine and motor drives
- Constant
volume capacity due to internal vacuum support
- Mobile
and easy to transport
T300
- Mobile Peristaltic unit (Non ATEX)
The
Elro T300 mobile peristaltic pumps are designed for
very wide range of applications across all industries.
Available with petrol, diesel and standard electric
motors. Over many years our unique patented pump system
has been successfully used world wide as the mobile
pump of choice for problem applications in remote areas.
- Able
to handle large solids - no clogging or blockage
- Can
run dry without damage
- Self
priming to 9.5 metres
- Long
suction line capability
- Able
to handle abrasive fluids
<<<
Back to the main AJ Holmes Products Page |
