Sigmund
Pulsometer Pumps (SPP)
Sigmund Pulsometer pumps or SPP
manufacture an extensive range of centrifugal pumps suitable for a variety of
applications. We predominately use the pumps to pump water, diesel and oil.
The pumps are built to DIN Standard and are therefore completely interchangeable with other DIN standard pump.
We can offer these pumps in a variety of materials including cast iron and bronze.
Different mechanical seals can be offered to suit the applcation.
These are available as close coupled, long coupled, vertical and split case.
Eurostream
Range - End Suction, close coupled
Eurostream
pumps are extensively used for heating, circulating duties,
water boosting, irrigation, fire protection and countless
other general service applications for both clean and slightly
contaminated non-corrosive liquids.
Temperature:
- 10 deg C Min to 120 deg C maximum
Pressure: - 10 bar maximum at 120 deg C
Motor Speed: 1450, 1760,2900, 3500 rpm
Capacity: 80 l/s at 1450 rpm , 100 l/s at 2900 rpm
Differential Head: 36m at 1450 rpm , 100m at 2900 rpm
Available
for 50hz and 60hz
Back to top
Unistream
Range - End Suction, long coupled
SPP
Pumps Unistream range are long coupled pumps designed to the
DIN24255 standard. The range covers 25 pump
sizes from
32mm to
125mm discharge affording 190 pump/motor combinations.
Unistream
pumps are extensively used for heating, circulating duties,
water boosting, irrigation, fire
protection
and countless other
general service applications for both clean and
slightly contaminated non-corrosive liquids.
Temperature:
- 10 deg C Min to 120 deg C maximum
Pressure: - 10 bar maximum at 120 deg C
Motor Speed: 1450 rpm , 2900 rpm
Capacity: 150 l/s maximum
Differential Head: 100 m maximum
Available
for 50hz and 60hz
Back to top
Instream
Range - Vertical Inline
The
Instream range have an straight in line design which allow savings
in time and cost to standardisation
of
pipework layout.
The range covers 12 pump sizes from 40mm
to 100mm.
Instream
pumps are extensively used for heating, circulating duties, water
boosting, irrigation,
fire protection
and countless other
general service applications for both
clean and slightly contaminated non-corrosive
liquids.
Temperature:
- 10 deg C Min to 120 deg C maximum
Pressure: - 10 bar maximum at 120 deg
C
Motor Speed: 1450 rpm , 2900 rpm
Capacity: 60 l/s maximum
Differential Head: 65m maximum
Available
for 50hz and 60hz
Back to top
Thrustream
Range - Horizontal Split case pump
The
Thrustream range of pumps provides robust split case esigns with
suction and discharge flanged connection in the lower half of the
casing. Top half casing and rotating assembly can be removed without
disturbing pipework. The range covers 25 pump sizes from 65mm to
350mm discharge.
Thrustream
pumps are xtensively used for heating, circulating
duties, water
boosting,
irrigation,
fire protection and
countless other general service
applications for both clean
and slightly
contaminated non-corrosive
liquids.
Temperature:
120 deg C maximum
Pressure: Up to 25 bar
Capacity: 1100 l/s maximum
Differential Head: 240m maximum
Available
for 50hz and 60hz.
Also
see our page about centrifugal
pumps.
We use these pumps to supply Mirrlees, Rustons and MAN for jacket water, raw water and valve cage cooling pumps on the diesel engines. Customers such a Npower, Scottish Power and Amec use the close coupled eurostream and vertical instream pumps to pump chilled water and filter wash pumps.
Back to top
|
